Plastic Submersible Sump Pump with Wide Angle Float Switch - B-A1

PRODUCT FEATURES

• Carbon/Ceramic mechanical seal
• Uses a single rowball bearing construction
• Piggy-back plug available for easy maintenance and replacement
• 1/4 HP, 3450 RPM motor powers the vane type semiopen impeller for high efficiency.
• Oil-filled motor for heat dissipation and continuous lubrication.
• Mechanical shaft seal assures reliable operation.
• Cast iron motor housing.

PRODUCT SPECIFICATION

• Pump/Motor Unit: Submersible Sump Pump
• Horsepower: 1/4
• Full Load Amps: 6.5
• Motor Type: PSC
• R.P.M.: 3450
• Voltage: 115
• Hertz: 60
• Temperature: 105 Degrees C
• Insulation: Class A
• Discharge Size: 1-1/2" NPT
• Solids Handling: 1/4"
• Power Cord: SJTW, 10' std.
• Minimum Recommended Sump Diameter:
  • Simplex = 18" (457mm)
  • Duplex = 30" (762mm)
• Automatic Operation: Wide angle float switch
• Handle: Thermoplastic
• Lubricating Oil: Dielectic Oil
• Motor Housing: Cast Iron
• Shaft: Steel
• Seal Faces: Carbon/Ceramic
• Seal Body: Anodized Steel
• Spring: Stainless Steel
• Bellows: Buna-N
• Impeller: Thermoplastic
• Upper/Lower Bearing: Ball Bearing
• Bottom Plate: Thermoplastic
• Fasteners: Stainless Steel
• Unit Weight: 15lbs.
• Shipping Weight: 15lbs.

See Product Specifications for detailed information on product.