Makita Coil Siding Air Nailer — 120 PSI, 2 1/2in. Nail Size, Model# AN611  Product Reviews

"This thing works great. Had no problem finding nails locally and they were much cheaper than what I found on line. I drives the 2" ring shank nail in very dry redwood ship-lap with no splitting even on the ends. I'm very pleased with this product to date."

"This nail gun loads easy, doesn't jam. The only thing is you have to buy a case of nails which you can build a couple of houses with. so if you don't have a big job to do this may not be the gun for you."

"I bought this to install Hardi-Plank siding. I used 1 1/4 inch SS and 2 inch SS nails. It worked great and it is light. Getting the depth of the nail's head set right and consistant was somewhat of a problem, but in my situation it didn't cause too much damage to the siding. Plus, I was shooting through 3/4 inch cement board and assume it would do better with wood."

"Have done entire houses with hammer and nails and will never do so again after buying this gun. I sided a 2 story garage alone using 16ft lgnths of cedar in about 3 days. Try using a jig, hammer and nail with a 16 footer alone! The included belt hanger on the tool was also very useful the higher I got as it allowed more mobility and kept the gun handy and the hose somewhat under control. The tool is very light, easy to load, and designed to get into fairly tight spots (only weak spot I see is the plastic nail guard so don't drop the tool )Have used this tool on several other applications such as floor sheathing and some interior planking. Great tool....."